Cisco 2911 Module Slots

This page presents the Cisco ISR routers simulated in Cisco TM Packet Tracer 7.3.1 and the WAN Interface Cards (WIC) and Network Modules (NM) available for those equipments.

  1. The SM-ES3-24-P module conencts to the router via an internal backplane link which presents as a pair of psuedo-1gig connections (only one of which is actually used in this configuration, for some reason), with some trunking configured on the router ports and a single, 1 gig link between the switch modules to give connectivity.
  2. Hi, VIC2-4FXO is to be installed in EHWIC slots of 2911? I am planning to install 4 x VIC2-4FXO cards to have 16 FXO. Any other option to have more FXO ports in future? I saw this module EM-HDA-6FXO too. I have PVDM3-64. Is it compatable with above VIC2-4FXO?

NM-16ESW-1GIG IP Base 2911 - 3945 12.2(8)T IP Base- 2811 - 3845 tied to platform slot density NME-16ES-1G IP Base 2911 - 3945E 12.4(3), 12.4(4)T IP Base- 2811 - 3845 tied to platform slot density NME-16ES-1G-P IP Base 2911 - 3945E 12.4(1), 12.3(14)T IP Base- 2811 - 3845 tied to platform slot density 1 ISR Platforms from 1841 to 3845 excluding. Similar To The Other Routers In The Isr Portfolio, The Isr-ax Routers Consist Of Three Product Families: The Cisco 3900-ax, 2900-ax, And 1900-ax Series Routers. From The Cisco 1921-ax Through The Cisco 3945e-ax, The Portfolio Provides Increasing Performance And Module Slot Density, And Each Router Comes Equipped And Ready To Deploy.

Router devices emulated in Cisco Packet Tracer

Cisco 1841 ISR router

The Cisco 1841 Integrated Services Router provides two fixed 10/100 (100BASE-TX) Ethernet ports, two integrated High-Speed WAN Interface Card (HWIC) slots that are compatible with WAN Interface Card (WICs) and Voice/WAN Interface Cards (VWICs), and one internal Advanced Integration Module (AIM) slot.

Cisco 2620XM ISR router

The Cisco 2620XM Multiservice Router provides a one-network module slot platform with one fixed 10/100 (100BASE-TX) Ethernet port, two integrated WAN Interface Card (WIC) slots, and one Advanced Integration Module (AIM) slot.

Cisco 2621XM ISR router

The Cisco 2621XM Multiservice Router provides a one-network module slot platform with two fixed 10/100 (100BASE-TX) Ethernet ports, two integrated WAN Interface Card (WIC) slots, and one Advanced Integration Module (AIM) slot.

The 2621XM supports the same modules that the 2620XM supports.

Cisco 2811 ISR router

The Cisco 2811 Integrated Services Router provides one Enhanced Network-Module slot with two fixed 10/100 (100BASE-TX) Ethernet ports, four integrated High-Speed WAN Interface Card (HWIC) slots that are compatible with WAN Interface Card (WICs), Voice Interface Cards (VICs) and Voice/WAN Interface Cards (VWICs), and dual Advanced Integration Module (AIM) slots.

Cisco 1941 ISR router

The Cisco 1941 Integrated Services Router (ISR) delivers highly secure data, mobility, and application services. Key features include two integrated 10/100/1000 Ethernet ports, 2 enhanced High-Speed WAN Interface Card slots, HWIC1 Internal Services Module slot, Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE) and Cisco Enhanced PoE.

Cisco 2901 ISR router

The Cisco 2901 Integrated Services Router (ISR) has been designed to delivers data, voice, video, and application services for branch offices. It includes 2 integrated 10/100/1000 Ethernet ports and 4 enhanced high-speed WAN interface card slots. This router key features are hardware-accelerated VPN encryption, integrated threat control, and 802.3af Power over Ethernet (PoE).

CISCO2911-DC/K9 Datasheet Overview

Cisco 2911 ISR router

The Cisco 2911 Integrated Services Router (ISR) provides 2 integrated 10/100/1000 Ethernet ports, 4 enhanced high-speed WAN interface card (WIC) slots, 2 onboard digital signal processor (DSP) slots and 1 onboard Internal Service Module for application services.

Cisco 819 ISR router

The Cisco 819 Integrated Services Router (ISR) supports machine-to-machine (M2M) applications that can enable enterprises to use 3G wireless WAN network services.

Cisco 829 ISR router

Cisco 829 Industrial Integrated Services Routers provide highly secure, reliable, and easy-to-manage 3G/4G LTE WAN cellular and Wireless LAN connectivity for mobile environments.

Cisco 2911 Module Slots Reset

Cisco CGR 1240 rugged router

See Full List On Cisco.com

The CGR 1240 is a ruggedized communication platform, designed for use in Field Area Network (FAN) power distribution grids that require outdoor, pole-mounted routers. The FAN is a distribution system in which power generation and transmission are linked to the power consumers.

Cisco 4321 ISR router (added in Cisco Packet Tracer 7.1)

Cisco 2911 Module Slots

Added in Packet Tracer 7.1, the Cisco 4000 Series Integrated Services Routers (ISR) revolutionize WAN communications in the enterprise branch. With new levels of built-in intelligent network capabilities and convergence, the routers specifically address the growing need for application-aware networking in distributed enterprise sites.

Cisco 4331 Integrated Services Router (added in Cisco Packet Tracer 7.3)

Cisco 3900 Series And Cisco 2900 Series Hardware Installation ...

Added in Cisco Packet Tracer 7.3, Cisco ISR 4331 and ISR 4321 feature Cisco IOS image resilience through secure boot-image and secure boot-config commands and add network programmability support to Packet Tracer through NETCONF / YANG protocols which are topics of the CCNP Enterprise ENCOR exam. Cisco ISR 4000 series support a large range of WAN or LAN connectivity options such as T1, T3/, serial, 10Gigabit Ethernet, and 4G LTE capabilities. It's network programmability capabilities through NETCONF / YANG model allow operationnal cost savings and makes configuration of a large branch offices number easier.

WIC modules

Module
Description
WIC-1AM

The WIC-1AM provides one internal V.90 analog modems. This WIC can be used for basic telephone service connections. The WIC-1AM uses one port for connection to a standard telephone line, and the other port can be connected to a basic analog telephone for use when the modem is idle.

WIC-1ENETThe WIC-1ENET is a single-port 10 Mbps Ethernet interface card, for use with 10BASE-T Ethernet LANs.
WIC-1T

The WIC-1T provides a single port serial connection to remote sites or legacy serial network devices such as alarm systems, Synchronous Data Link Control (SDLC) concentrators, and packet over SONET devices.

Sync Max Speed : 2048 Mbit/s
Async Max Speed : 115.2 Kbit/s

WIC-2AMThe WIC-2AM card features dual RJ-11 connectors, which are used for basic telephone service connections. The WIC-2AM has two internal V.90 analog modems to allow multiple data communication connections. These WICs can be used for incoming or outgoing analog modem calls.
WIC-2T

The 2-port asynchronous/synchronous serial network module provides flexible multi-protocol support, with each port individually configurable in synchronous or asynchronous mode, offering mixed media dial support in a single chassis. Applications for asynchronous/synchronous support include:

- Low speed WAN aggregation (up to 128 Kbps),
- Dial-up modem support,
- Async or Sync connections to management ports of other equipment,
- Transport of legacy protocols such as Bi-sync and SDLC.

HWIC-4ESWThe HWIC-4ESW provides four switching ports.
HWIC-8ANew module included in CiscoPacket Tracer 6.0.1Cisco ISR routers. This serial modules allows out of band management of Cisco networking devices through their console port. The HWIC-8A module allows the connection of 8 console cables using the octal cable, each serial connection being mapped to a TCP port for telnet access.
WIC-CoverThe WIC cover plate provides protection for the internal electronic components. It also helps maintain adequate cooling by normalizing airflow.

Network modules (NM)

Module
Description
NM-1EThe NM-1E features a single Ethernet port that can connect a LAN backbone which can also support either six PRI connections to aggregate ISDN lines, or 24 synchronous/asynchronous ports.
NM-1E2WThe NM-1E2W provides a single Ethernet port with two WIC slots that can support a single Ethernet LAN, together with two serial/ISDN backhaul lines, and still allow multiple serial or ISDN in the same chassis.
NM-1FE-FXThe NM-1FE-FX Module provides one Fast-Ethernet interface for use with fiber media. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. Single port network modules offer autosensing 10/100BaseTX or 100BaseFX Ethernet.
NM-1FE-TXThe NM-1FE-TX Module provides one Fast-Ethernet interface for use with copper media. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. Single port network modules offer autosensing 10/100BaseTX or 100BaseFX Ethernet. The TX (copper) version supports virtual LAN (VLAN) deployment.
NM-1FE2WThe NM-1FE2W Module provides one Fast-Ethernet interface for use with copper media, in addition to two Wan Interface Card expansion slots. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. Single port network modules offer autosensing 10/100BaseTX or 100BaseFX Ethernet. The TX (copper) version supports virtual LAN (VLAN) deployment.
NM-2E2WThe NM-2E2W provides two Ethernet ports with two WIC slots that can support two Ethernet LANs, together with two serial/ISDN backhaul lines, and still allow multiple serial or ISDN in the same chassis.
NM-2FE2WThe NM-2FE2W Module provides two Fast-Ethernet interfaces for use with copper media, in addition to two Wan Interface Card expansion slots. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards.

NM-2W

The NM-2W Module provides two WAN Interface Card expansion slots. It can be used with a broad range of interface cards, supporting a diverse array of physical media and network protocols.
NM-4A/SThe 4-port asynchronous/synchronous serial network module provides flexible multi-protocol support, with each port individually configurable in synchronous or asynchronous mode, offering mixed-media dial support in a single chassis. Applications for Asynchronous/Synchronous support include: Low speed WAN aggregation (up to 128 Kbps), dial-up modem support, Async or Sync connections to management ports of other equipment, and transport of legacy protocols such as Bi-sync and SDLC.
NM-4EThe NM-4E features four Ethernet ports for multifunction solutions that require higher-density Ethernet than the mixed-media network modules.
NM-8A/SThe 8-port asynchronous/synchronous serial network module provides flexible multi-protocol support, with each port individually configurable in synchronous or asynchronous mode, offering mixed-media dial support in a single chassis. Applications for Asynchronous/Synchronous support include: Low speed WAN aggregation (up to 128 Kbps), dial-up modem support, Async or Sync connections to management ports of other equipment, and transport of legacy protocols such as Bi-sync and SDLC.
NM-8AMThe NM-8AM Integrated V.92 analog modem network module provides cost-effective analog telephone service connectivity for lower-density remote-access service (RAS), dial-out and fax-out modem access, asynchronous dial-on-demand routing (DDR) plus dial backup, and remote router management. Both the 8-port and 16-port versions use RJ-11 jacks to connect the integrated modems to basic analog telephone lines on the public switched telephone network (PSTN) or private telephony systems.
NM-CoverThe NM cover plate provides protection for the internal electronic components. It also helps maintain adequate cooling by normalizing airflow.

Enabling Borderless Networks at the Branch

The Cisco 2911 Integrated Services Router (ISR) delivers highly secure data, voice, video, and application service. Key features include:

Connecting Cisco IP VSAT Satellite WAN Network Modules To The Network

  • 3 integrated 10/100/1000 Ethernet ports (RJ-45 only)
  • 1 service module slot
  • 4 enhanced high-speed WAN interface card slots
  • 2 onboard digital signal processor (DSP) slots
  • 1 Internal Service Module slot for application services
  • Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE) and Cisco Enhanced PoE
  • Security
    • Embedded hardware-accelerated VPN encryption for secure connectivity and collaborative communications Integrated threat control using Cisco IOS Firewall, Cisco IOS Zone-Based Firewall, Cisco IOS IPS, and Cisco IOS Content Filtering
    • Identity management using authentication, authorization, and accounting (AAA) and public key infrastructure
  • Voice
    • High-density-packet voice DSP module, optimized for voice and video support
    • Standards-certified VoiceXML browser services
    • Cisco Unified Border Element capabilities
    • Cisco Unity Express voicemail support
    • Support for Cisco Communications Manager Express and Survivable Remote Site Telephony